It does not matter whether someone is nearby or in a country far away. Welcome to a world of previously unheard-of possibilities for connecting and communicating by way of Amateur Radio and the internet. Search and connect to local node stations with a simple button touch. The system will automatically obtain node station information and setup the required frequency and digital code parameters. Wherever there is a WIRES-X local node station that is reachable by Amateur radio, complicated connection operation steps are no longer necessary.
Node station ID, city name, as well as distance and bearing are indicated on the display of the transceiver, and can be checked at a glance. Establishing the connection between the HRI and a computer is quick and simple, requiring only a single USB cable.
Support for USB bus power means that an additional external power supply is not needed. May not be supported by some routers. Working your way through complicated router settings is a thing of the past.
Using a C4FM digital transceiver enables a very simple access operation by following the on-screen instructions. For updating information of the firmware, visit the following website. Using the preset search function for searching. With a C4FM digital transceiver, an accessible node nearby can be found easily.
Just pressing and holding the DX key transmits a search signal at the current frequency or using preset search channel. Just pressing and holding the DX key transmits a search signal at the current frequency or using preset search channel.
When a node is found, the operating frequency is switched to that of the node automatically, and the node ID and city name will appear on the screen since the node automatically transmits the ID information in return on receiving the search signal.
Just by setting the transceiver at the frequency of the node you found, then pressing and holding the D key, the preset search function will search the local node automatically.
After the node ID and the city name appear on the screen, you can use the node station. When using an analog FM transceiver, find an analog station from the active ID list, then set the transceiver at the frequency of the node. Click here for the instruction to open a node. Displays the list sorted in descending order from the room with the most number of activities the most nodes connected. This is useful when you know part of the ID.
Enter the keyword you want to search by directly. The IDs partially matching the entered keyword will be found. When the local node does not connect to another node, the node or room your transceiver most recently connected to will appear. Select the node or room and start a QSO immediately.
You can register IDs of your frequently used nodes and rooms sorting into 5 categories. You should then ensure your XDR has the latest firmware. The instructions are in the zip file on how to update it. You'll need those in order to initially fire up the Wires-X software with your radio connected. With the radio turned off, hold down the DX button and press the power button.
Once it starts let go of the buttons. You need to do this so that during the software setup screen of Wires-X in the next step, it will read your unique radio ID and auto-populate it where it says serial number on the Wires-X program.
You do this once and then you're golden It says serial number there because this was originally for the HRI serial number. If your radio ID is not automatically filled in, your computer is not reading it. You cannot manually enter that in. That is going to be a driver issue at that point, either not installed or the wrong port selected. Now we finally come to the Wires-X software part of your request.
If you are still logged into the Wires-X site great, if not log back in and select "Node Owners Page" on the left. On this page download the Wires-x PC software version 1.
Please note that when it goes to install, it will ask if you want Wires-X to start automatically. I personally do not have it auto start on my computers where I run a personal node, like you are about to do. That setting request is a hold over for the HRI device when used on a computer with a dedicated repeater connected to it.
The choice is yours of course. Okay, at this point you should also download the PDF on that same page that says Wires-X Portable Digital Node Instruction Manual You really need to keep this handy until you memorize the buttons you'll hit to enable the radio as a Wires-X node.
You do it again to take it out of Wires-X mode as well. I could be wrong on all of this, but it's probably correct. Others may stumble onto this thread as well so I hope it helps. Last edited by a moderator: Mar 25, I provided the direct link to the driver for the SCU cable in step 6. You may have other obstacles to overcome if that does not work for you.
It is characterized by its speed and many innovative features. More Java Update 8. The Java SE Runtime Environment contains the Java virtual machine,runtime class libraries, and Java application launcher that arenecessary to run programs written in the Java programming language.
It is not a development environment and … more info Additional titles containing latest version of wires-x software. More AMD Software Latest News. Firefox 96 processes websites faster. Security updates for Acrobat, InDesign and more. Microsoft Edge browser version Intel driver update The best free SSD tools.
0コメント